DC Series Winding Motor Controller Assemblage 1215-8307 / 1219-8406, with Foot Pedal Throttle

• After-sales Service: 1 Year
• Warranty: 3months-1year
• Material: Aluminum Alloy
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 1215-8307
• Surface Treatment: Polishing
• Customized: Customized
• Weight: 1.7 Kg
• Logic Input Current: <2 Ma
• Status LED Output Current (Max.): <2 Ma
• PWM Operating Frequency: 15.6 kHz
• Place of Origin: Anhui, China
• Model Number: 1215-8307
• Current Rating (AMPS): 200A
• Dimensions: L140*W180*H71mm
• Compatible Equipment Type: Forklift
• Power Source: AC
• Voltage: 36-48V
• Transport Package: Box
• Specification: L140*W180*H71mm
• Trademark: ECAS
• Origin: China
• HS Code: 8537109090
• Production Capacity: 36000PCS/Year
• Package Size: 26.00cm * 18.00cm * 9.00cm
• Package Gross Weight: 2.000kg

Product Description

Product  Information Introduction:

 

 

SPECIFICATIONS
 

NOMINAL VOLTAGE RANGE	36-48 V
VOLTAGE DROP	<0.20 V @ 100 A
UNDERVOLTAGE CUTBACK	21 V
MINIMUM ELECTRICAL ISOLATION	500 VAC
CURRENT LIMIT	500 A
2 Minute Rating	500 A
KSI INPUT
Input Voltage	16-45 V
Input Current	W/o Programmer: 80 mA W/ Programmer: 130 mA
LOGIC INPUT
Input Threshold	8 V
Current	10 mA @ 24 V
OPERATING FREQUENCY	15 kHz
TEMPERATURE
Ambient (Operational)	-40°C to 50°C
Undertemperature Cutback (Heatsink)	-25°C
Overtemperature Cutback (Heatsink)	85°C
THROTTLE INPUT	0-5 V

 

PHYSICAL SPECIFICATION
 

DIMENSION
Length	254 mm
Width	180 mm
Depth	82 mm

 

Product Description

Overview

• Model: 1215-8307 (HELI DQKC-015)
• Norminal Battery Voltage (Volts): 36V / 48V
• 2 Minute Current Rating (amps): 500A
• Under Voltage Cutback (Volts): 21V
• Contactor Voltage (Volts): battery voltage
• PWM operating frequency: 15 kHz
• Electrical isolation to heatsink (min.): 500 VAC
• KSI input voltage: 16-45V

Features Include

• Meets or exceeds EEC fault detect requirements, with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, MOSFET output, contactor drivers, and contactors
• Programmable input sequencing options include several combinations of neutral start and static return to off (SRO)
• Arcless contactor switching with microprocessor-controlled contactor sequencing
• Smooth, controlled plug braking: with either variable (throttledependent) or fixed plug current limit
• Neutral braking option provides automatic plug braking in neutral
• MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions

CURTIS AC Motor Controller 1215-8307

CURTIS had stopped the production of 1215-8307.

This current 1215-8307 DC Series Motor controller is a product of a Chinese manufacturer. With same dimensions and functions of the original products, this 1215-8307 can also be programmed by CURTIS Model 1313-4331 Handheld Programmer or CURTIS 1314 PC programming station.

The typical application of controller 1215-8307 is HELI forklift traction motor speed control (part number DQKC-015). HELI forklift controller setting parameter list (PDF format)

Overview:

Curtis 1215-8307 programmable motor speed controller provides efficient, cost-effective, and simple-to-install control for a variety of large industrial vehicles. Typical applications include walkie / rider pallet trucks, forklifts, stackers, reach trucks, and other industrial trucks.

Key Features:

• Model: 1215-8307 (HELI DQKC-015)
• Norminal Battery Voltage (Volts): 36V / 48V
• 2 Minute Current Rating (amps): 500A
• Under Voltage Cutback (Volts): 21V
• Contactor Voltage (Volts): battery voltage
• PWM operating frequency: 15 kHz
• Electrical isolation to heatsink (min.): 500 VAC
• KSI input voltage: 16-45V
• KSI input current (no contactors engaged):
  • 80 mA without programmer
  • 130 mA with programmer
• Logic input current: < 2 mA
• Status LED output current (max.): < 2 mA
• Throttle Type:
  • Type 1: 5kΩ - 0
  • Type 2: 0 - 5V, 0 - 10V, 3-wire pot, and electronic throttles
  • Type 3: 0 - 5kΩ
• Ambient Operating Temperature Range: -40°C to 50°C
• Heatsink Overtemperature Cutback: 85°C
• Heatsink Undertemperature Cutback: -25°C
• Storage ambient temperature range: -40°C to 85°C
• Dimensions: L254 x W180 x H82 mm
• Net Weight: about 3.7 kg

Features Include:

• Power MOSFET design, providing
  • infinitely variable drive and plug brake control
  • silent high-frequency operation
  • high efficiency (for reduced motor and battery losses)
• Overvoltage and undervoltage protection
• Thermal protection/compensation circuitry that provides undertemperature cutback, constant current limit over operating range, and linear rollback in overtemperature-thus preventing sudden power loss regardless of thermal conditions
• Diagnostic and test information for the controller-and other system components-readily available through both an on-board LED and the optional handheld programmer
• Meets or exceeds EEC fault detect requirements, with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, MOSFET output, contactor drivers, and contactors
• Programmable input sequencing options include several combinations of neutral start and static return to off (SRO)
• Arcless contactor switching with microprocessor-controlled contactor sequencing
• Smooth, controlled plug braking: with either variable (throttledependent) or fixed plug current limit
• Neutral braking option provides automatic plug braking in neutral
• MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
• Emergency reverse (belly button switch) provides full function with a single input
• Anti-rollback (ramp start) provides full power for starting on ramps
• Simple contactor and switch wiring, with coil drivers monitored for shorts and open circuits-thus ensuring fail-safe operation
• Flexible throttle circuitry accommodates a variety of throttle types: 5kΩ-0, 0-5kΩ, 0-5V, 0-10V, inductive, Hall, etc.
• Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
• Sealed package, providing environmental protection
• Power connections made by tin-plated solid copper busses, with a polarized Molex connector for control signals
• Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
• Rugged anodized aluminum extruded housing meets IP65 environmental sealing standards for use in harsh environments.

We supply also the controller assemblage of 1215-8307.

 

1

Product Category

Application

 

Production Line

 

 

Related Hot sale Products

 

Hot sale orchard lifting and picking equipment,If you are interested, you can click the link to view.
 

 

Package and Delivery

We have a 24 hours *7 days friendly and professional customer service team, providing a strongly 5-year warranty and free lifelong technical support. All batteries will be tested for capacity and checked for external damage before packaging. And we provide English guideline and user manual to help you operate battery easily and quickly.

 

Company Profile

                                                    Anhui Ekofil Autopats Company

 Our company is located in HEFEI City, ANHUI Province China, is the large-scale professional agriculture Machinery,Forklift Parts manufacturer with integration of  manufacturing, export and after-sale service. Establish in 2017, by now Forklift electrical accessories basically cover the vehicles of major domestic brands( Such as Zhongli,Nuoli,Afterburner,Heli,Baoli,TCM TEU)

The company′s main products cover Electric Vehicles,Electric Forklifts,Motor Controller ,Lithium battery and sell parts and accessories for electric Vehicles ,including motors Electric Controls ,meters,accelerators,control handles ,DC converters,power connectors ,wiring harness,Various electrical switches and so on.

We have professional quality inspection department, every machine will be tested 3 times before delivery in order to make sure the machinery in future. 

With high quality product, competitive price, and best after-sale service, we have gained good reputation from all over the world, such as Europe, South Korea North, America, Central and South America, Africa, Australia, New Zealand and so on.Base on it ,we welcome buyers from all over the world.


 

FAQ

Q1.Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.

Q2. Do you have any MOQ limit?
A: Small quantity is accepted , but we offer quantity discount.

Q3. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production and Shipping.